Skip to content
Company Deep DiveADSK

[ADSK] Autodesk: Can Renewals Sustain Billings Growth After the Sales Reorganization?

Editorial illustration for [ADSK] Autodesk: Can Renewals Sustain Billings Growth After the Sales Reorganization?
Published 30 min read

Summary

Autodesk grew Q2 revenue 16% to $2.05 billion while billings growth slowed to 10%; the November 24 results must show whether renewals sustain 9%-10% organic billings growth.

Autodesk is a global 3D design, engineering and entertainment software company whose products span architecture, engineering, construction, product design and manufacturing, and media and entertainment[1]. According to the Drillr earnings calendar, Autodesk is scheduled to hold its earnings call on 2026-11-24 to report the third quarter of fiscal 2027 (three months ended October 31, 2026)[2]. In the latest disclosed second quarter, which ended July 31, 2026, revenue was $2.046 billion, up 16% year over year (14% in constant currency), billings were $1.854 billion, up 10%, GAAP operating margin was 29% and non-GAAP operating margin 41%, non-GAAP EPS was $3.30 and free cash flow was $561 million[3]. The third-quarter guidance Autodesk issued on August 27 already includes MaintainX, the maintenance-software company it consolidated on August 3: revenue of $2.125 billion to $2.140 billion, GAAP EPS of $1.57 to $1.87 and non-GAAP EPS of $3.04 to $3.09, alongside full-year billings guidance of $8.575 billion to $8.650 billion and a full-year non-GAAP operating margin of about 39%[4]. Analyst estimates compiled by Drillr put average third-quarter revenue at $2.134 billion (18 analysts, range $2.104 billion to $2.144 billion), essentially at the guidance midpoint, and average EPS at $3.07 (19 analysts, range $3.04 to $3.10); the data source does not state the basis, but the figure sits in the middle of the non-GAAP guidance[5].

Three things matter most in these results. First is renewal and expansion after the sales reorganization: about two points of second-quarter revenue growth came from the accounting effect of the new transaction model[6], yet billings growth slowed from 18% in the first quarter to 10%[7], and management said organic billings growth for the year is about 9%-10% after adjusting for currency and transaction-model effects[8]; third-quarter billings guidance and regional performance will test whether that framing holds. Second is the path of current remaining performance obligations (cRPO): Autodesk is reducing multi-year contract discounts, and total remaining performance obligations (RPO) grew only 2% in the second quarter, but cRPO, which is far less sensitive to contract length, also slowed from 18% to 12%[3]; whether third-quarter cRPO holds near 12% decides whether the slowdown reads as a change in contract terms or as weaker renewal demand. Third is the profit cost of MaintainX's first full quarter inside Autodesk: the roughly $3.6 billion deal was partly financed with borrowing[9], which is why third-quarter non-GAAP EPS guidance sits below the second quarter's $3.30, and the report will show whether cost discipline in the existing business can absorb the acquired losses and interest so that the roughly 39% full-year margin guidance is not cut.

Company Background and Business Structure

Autodesk sells professional software subscriptions to designers, engineers and builders, helping customers visualize, simulate and analyze real-world performance early in the design process, and it sells through both direct and indirect channels worldwide[1]. It offers term subscriptions to individual products and industry collections, cloud services and enterprise business agreements (EBAs) for large customers, and EBA signings have historically been concentrated in the fourth fiscal quarter[10]; an EBA gives an enterprise token-based access to a broad pool of products over the contract term, while Flex lets users pre-purchase tokens and use any Flex product at a daily rate[11]. As of January 31, 2026, Autodesk employed about 14,300 people, roughly 1,000 fewer than the approximately 15,300 at the end of the prior fiscal year[12].

Autodesk's sales channels have changed structurally over the past two years. Under the new transaction model, Solution Providers only quote customers while the actual transaction happens directly between Autodesk and the customer, and channel incentives that used to reduce revenue are now booked as operating costs; in fiscal 2027 this continues to lift reported revenue growth and lower operating margin while being broadly neutral to operating profit and free cash flow dollars[13]. About 63% of fiscal 2026 revenue came from direct transactions, up from 42% a year earlier[14]; the share of revenue from TD Synnex, the largest distributor, fell from 39% in fiscal 2024 and 33% in fiscal 2025 to 14% in fiscal 2026[15], and dropped further to 8% in the second quarter of fiscal 2027[16]. On August 3, 2026, Autodesk completed the acquisition of MaintainX for about $3.6 billion, net of cash acquired[9]; MaintainX provides a cloud platform for maintenance management, asset tracking, inspections and work orders, extending Autodesk's relationship with manufacturing and construction customers into asset operations and maintenance[17].

Autodesk has a single reportable segment and discloses revenue by product family. In fiscal 2026, which ended January 31, 2026, subscription revenue was $6.743 billion, up 18%; by product family, AECO (architecture, engineering, construction and operations) revenue was $3.583 billion, up 22%, AutoCAD and AutoCAD LT $1.787 billion, up 14%, manufacturing (MFG) $1.379 billion, up 16%, and media and entertainment (M&E) $332 million, up 5%[18]. By region, the Americas generated $3.178 billion, EMEA $2.794 billion and APAC $1.234 billion[19], so EMEA and APAC together accounted for about 56%. The annual report also notes that standalone AutoCAD and AutoCAD LT products, excluding collections, made up 25% of fiscal 2026 revenue, so AutoCAD-centered products and collections are the main revenue base[20].

Financial History and Current Position

The annual record shows Autodesk accelerating revenue while expanding margins and cash flow. Total revenue rose from $5.497 billion in fiscal 2024 to $6.131 billion in fiscal 2025 (+12%) and $7.206 billion in fiscal 2026 (+18%); within fiscal 2026, direct revenue was $4.560 billion, up 78%, and indirect revenue $2.646 billion, down 26%[14], a channel migration that by itself lifted reported growth. Fiscal 2026 gross profit was $6.556 billion, a gross margin of about 91%; GAAP operating income was $1.578 billion, a 22% operating margin that included $216 million of restructuring charges; non-GAAP operating income was $2.737 billion, with margin rising from 36% in the prior two years to 38%; net income was $1.124 billion, diluted EPS $5.23 and non-GAAP EPS $10.43[21].

Cash flow improved even more than profit, although changes in contract length and billing terms make it volatile. Fiscal 2026 operating cash flow was $2.452 billion, up from $1.607 billion in fiscal 2025 and $1.313 billion in fiscal 2024, while capital expenditures were only $43 million; Autodesk repurchased about 5 million shares for $1.40 billion during the year and ended it with $2.97 billion in cash, cash equivalents and marketable securities[22]. At the end of January 2026, RPO was $8.300 billion, cRPO $5.479 billion and unbilled deferred revenue $3.607 billion, and the net revenue retention rate (NR3) was above the 100%-110% range in constant currency, partly because of the new transaction model[23].

The first half of fiscal 2027 extended revenue growth and margin expansion, but billings and RPO slowed noticeably. First-quarter revenue was $1.934 billion, up 18%, billings $1.688 billion, up 18%, GAAP operating margin 28% and non-GAAP 39%, non-GAAP EPS $2.99 and free cash flow $876 million, up 58%[7]; second-quarter revenue was $2.046 billion and billings $1.854 billion, deferred revenue was $4.258 billion, up 11%, RPO $7.433 billion, up 2%, and cRPO $5.245 billion, up 12%[3]. Second-quarter net income was $492 million versus $313 million a year earlier, first-half operating cash flow was $1.468 billion[24], and recurring revenue made up 97% of quarterly revenue[25]. On the balance sheet, Autodesk had $2.50 billion of notes and $1 billion of commercial paper outstanding at July 31, and on August 3 it drew a further $1 billion term loan for the acquisition[9]; in September it also issued $500 million of 5.050% notes due 2029 and $500 million of 5.650% notes due 2033[26].

Operating Model

Almost all of Autodesk's revenue is subscription revenue recognized over the contract term, so growth depends on renewals, add-ons and new customers. Second-quarter subscription revenue was $1.952 billion and other revenue $94 million[24], so subscriptions were about 95% of total revenue; billings are defined as revenue plus the net change in deferred revenue less the net change in contract assets, excluding currency effects and deferred revenue acquired in business combinations[27]. Renewals and expansion therefore show up first in billings and deferred revenue and only then convert month by month into subscription revenue over the contract term; reported revenue growth also layers on the new transaction model (about two points in the second quarter), currency (16% reported versus 14% in constant currency in the second quarter) and about $60 million of MaintainX revenue in the second half[28]. This structure means revenue reacts to demand with a lag, while billings and cRPO are the earlier signals.

Profit is driven jointly by a very high gross margin and sales efficiency. Second-quarter gross profit was $1.870 billion, a gross margin of about 91%, and operating expenses were $1.271 billion, including $616 million of marketing and sales, $464 million of research and development and $179 million of general and administrative expense[24]; operating expenses grew 10%, below 16% revenue growth, with higher sales costs driven mainly by Solution Provider commissions and higher subscription costs driven mainly by cloud hosting[29]. The second-quarter GAAP operating margin was 29%, which becomes 41% on a non-GAAP basis after adding back about nine points of stock-based compensation, about two points of amortization and about one point of acquisition costs[30]. The new transaction model lowers margin without changing profit dollars, while MaintainX affects both revenue and operating losses; in its 10-Q, Autodesk indicated that third-quarter marketing and sales expenses would rise with Solution Provider commissions and the acquisition, and that research and development expenses would rise with investment in cloud, platform and AI[29].

Cash flow is driven by billing timing and working capital and is highly seasonal. Large customers and EBAs are billed heavily in the fourth quarter and collections peak in the first quarter, so free cash flow was $876 million in the first quarter and $561 million in the second, $1.437 billion for the half[3]; within first-half operating cash flow of $1.468 billion, lower accounts receivable contributed $753 million and lower deferred revenue subtracted $434 million[24]. Autodesk historically relied on multi-year contracts billed upfront to enterprise customers to meet free cash flow targets, a practice its audit committee investigated in 2024[31]; the annual report explains that when customers move from multi-year upfront billing to annual billing, the unbilled portion of RPO falls while deferred revenue, billings, cRPO, revenue and free cash flow remain broadly unchanged[23]. Full-year free cash flow guidance of $2.725 billion to $2.750 billion already includes about $45 million of MaintainX transaction expenses and about $70 million of capital expenditures[4], which leaves roughly $1.29 billion to $1.31 billion to be generated in the second half.

Industry and Competitive Position

Autodesk competes in a vigorously contested design-software market whose entry barriers are being lowered by cloud and AI. The annual report names primary competitors including Adobe, Bentley, Dassault Systèmes and its SolidWorks unit, Hexagon's Intergraph, Nemetschek, Oracle, Procore, PTC, Siemens and Trimble, and acknowledges that the platform shift from personal computers to cloud and mobile lowers entry barriers and that machine learning and other AI technologies may alter the market in unpredictable ways and reduce customer demand[32]. Autodesk's advantage comes from the long-standing adoption of AutoCAD, Revit and similar tools across architecture and engineering workflows and from the complete workflows formed by its industry collections, but that advantage also means revenue depends heavily on AutoCAD-related products[20].

Management's answer to AI disruption is to combine proprietary models with frontier models and to extend the business into construction and operations. On the second-quarter call, management said Autodesk is building an open platform that combines probabilistic AI with deterministic engineering, pairing proprietary geometry models such as Neural CAD with frontier models, that Fusion growth is being driven by AI features and MCP connectors, and that Forma, the construction and infrastructure cloud, is winning business among large general contractors[33]. Chief executive Andrew Anagnost said Autodesk will keep charging for machine-driven and API access, and that lowering the Flex minimum to $399 drove downmarket adoption[8]. When it announced the MaintainX deal, Autodesk said expanding into operations would unlock higher-value system-level AI and extend its relationship with assets from years to decades[34]; AI products have no separate revenue disclosure yet, however, so whether this positioning turns into revenue can only be observed indirectly through Make revenue and NR3.

Core Debates

Autodesk grew revenue 16% in its fiscal second quarter, but about two points came from the accounting effect of its new transaction model and about two from currency, while billings growth slowed from 18% to 10%. After its sales reorganization, can renewals and expansion from existing customers sustain the 9%-10% organic billings growth management expects once those effects and the newly acquired MaintainX are stripped out?

This question matters because subscriptions make up more than 95% of revenue, and renewals and expansion determine billings, deferred revenue and next year's revenue. Autodesk launched the final phase of its sales and marketing optimization program in the fourth quarter of fiscal 2026[35], while reported growth layers on transaction-model, currency and acquisition effects at the same time; only by peeling those apart can the real pace of the existing business be judged. Management said on the call that second-quarter renewal rates were strong and new subscription growth was within expectations[6], yet billings growth fell from 18% in the first quarter to 10% in the second.

The current evidence shows revenue holding up at the product-family level while billings slow. Second-quarter AECO revenue was $1.029 billion, up 17%, AutoCAD and AutoCAD LT $500 million, up 14%, and MFG $385 million, up 15%[36]; billings were $1.854 billion, up 10% as reported and 12% in constant currency[6]. NR3 as of July 31 approximated the top end of the 100%-110% range, compared with slightly above the range a year earlier[25]. Management said renewal productivity improved significantly and seller plan attainment was much closer to target than in the first quarter, with the Americas and APAC recovering faster and Western Europe's expansion business recovering more slowly because of consultation periods; full-year billings guidance was raised by about two points, with about one point, roughly $70 million, from MaintainX and the other point from the existing business[8].

The financial transmission runs as follows: renewal productivity and expansion recover after the reorganization, producing renewals, add-ons and collection upgrades that first become billings, then subscription revenue through deferred revenue recognized over the contract term, and finally reported revenue once the transaction model, currency and MaintainX consolidation are layered on. The alternative reading is that part of the billings slowdown comes from the exit of multi-year discounts and renewal timing and part from an expansion gap caused by the reorganization, while revenue resilience owes much to already-billed deferred revenue and the transaction-model tailwind; management also flagged that fiscal 2027 includes a large EBA renewal cohort concentrated in the fourth quarter, creating a tough year-on-year comparison[37], so the real change in demand may not be fully visible until the fourth-quarter renewal season. Because the contributions of the new transaction model and MaintainX are only management approximations, organic growth after stripping them out can only be estimated.

In the third quarter, the points to watch are whether revenue approaches the top of the $2.140 billion guidance, whether full-year billings guidance holds at $8.575 billion to $8.650 billion or rises again[4], whether the 9%-10% organic billings growth framing is reiterated, whether NR3 stays at the top of its range and whether Western Europe's expansion business recovers. If third-quarter revenue falls below the $2.125 billion low end of guidance, renewals and expansion after the reorganization have missed plan; if billings guidance is cut while revenue still meets guidance, revenue resilience is coming mainly from existing deferred revenue rather than new renewals and expansion.

Autodesk says it is deliberately reducing multi-year contract discounts, which temporarily slows growth in remaining performance obligations; total RPO grew only 2% in the second quarter. Yet current RPO, which is far less sensitive to contract length, also slowed from 18% to 12%. Can current RPO hold near 12% in the third quarter, showing that the slowdown reflects contract terms rather than weaker renewal demand?

This question matters because Autodesk's cash flow used to depend on multi-year prepaid contracts, and after moving to annual billing and removing multi-year discounts, RPO, billings and cash flow all become more volatile. Separating changes in terms from changes in demand determines how investors should read the coming billings and cash-flow data. In the risk factors of its 10-Q, Autodesk also acknowledges that the shift to named-user plans and annual billing of multi-year contracts affected the timing of billings and collections in fiscal 2024 through 2026 and will continue into fiscal 2027[38].

The current evidence shows the metrics slowing out of step with one another. At the end of the second quarter, deferred revenue was $4.258 billion, up 11%, unbilled deferred revenue $3.175 billion, down 8%, RPO $7.433 billion, up 2%, and cRPO $5.245 billion, up 12%[3]; at the end of the first quarter, the same four items were $4.457 billion (+13%), $3.351 billion (+4%), $7.808 billion (+9%) and $5.383 billion (+18%)[7]. In its earnings release, Autodesk attributed the RPO slowdown to its sustained program of reducing multi-year discounts, including winding down multi-year maintenance-to-subscription renewals, and said this benefits price realization over time[3]; compared with the end of January 2026, second-quarter deferred revenue was down 9%, RPO down 10% and cRPO down 4%[25], part of which reflects the normal seasonality of heavy fourth-quarter billing.

The financial transmission runs as follows: the exit of multi-year discounts and the move to annual billing reduce unbilled deferred revenue and non-current RPO, while cRPO and deferred revenue reflect revenue already contracted for the next 12 months, which then becomes subscription revenue; a second path runs from billing timing to accounts receivable and deferred revenue, and from there to operating and free cash flow. The alternative reading is that the drop in cRPO growth from 18% to 12% exceeds what a change in terms normally produces, that part of the first quarter's high growth may have come from early billing of large EBA renewals in the prior fourth quarter, and that the large EBA renewals concentrated in the fourth quarter of fiscal 2027[37] will make second-half comparisons harder. The annual report itself says cRPO should remain broadly unchanged when customers switch to annual contracts[23], so a sustained cRPO slowdown cannot be explained by contract terms alone, which is exactly what third-quarter data need to test.

In the third quarter, the points to watch are whether cRPO growth stays at or above 12%, whether the decline in unbilled deferred revenue narrows, whether deferred revenue keeps growing year over year and whether full-year free cash flow guidance of $2.725 billion to $2.750 billion is maintained[4]. If cRPO growth falls below 9%, the slowdown can no longer be explained by contract terms alone; if deferred revenue turns to a year-over-year decline, the pool of billed but unrecognized revenue is shrinking.

Autodesk paid about $3.6 billion, partly with borrowed money, for MaintainX, a maintenance-software company that is not yet profitable, and its third-quarter earnings-per-share guidance is lower than its second-quarter result as a result. In MaintainX's first full quarter inside Autodesk, can cost discipline in the existing business absorb the acquired losses and interest so that the roughly 39% full-year margin guidance holds?

This question matters because this is Autodesk's largest acquisition in recent years, extending the business from design and construction into asset operations and maintenance, while management has promised an unchanged margin path. Management said fiscal 2028 non-GAAP margins should improve modestly from fiscal 2027's roughly 39%, and the target remains a 41% non-GAAP operating margin in fiscal 2029[28]; the third quarter is the first test of that commitment.

The current evidence shows that margins in the existing business had already risen markedly before the acquisition. Second-quarter non-GAAP operating margin was 41%, up two points, and non-GAAP EPS was $3.30, up $0.68 from a year earlier[3], compared with non-GAAP EPS of $2.99 in the first quarter[7]; second-quarter interest and other income, net, was a $6 million loss versus a $12 million gain a year earlier[24]. Chief financial officer Janesh Moorjani said the full-year non-GAAP margin guidance is unchanged because higher underlying margins from operating leverage and go-to-market optimization offset dilution from MaintainX[39]; by comparison, the pre-acquisition full-year GAAP operating margin guidance issued in May was 26%-28%[40], lowered in August to 25%-27%. The third-quarter EPS reconciliation shows amortization of purchased intangibles and developed technologies of $0.29 to $0.48 per share and acquisition-related costs of $0.21 to $0.26 per share[30], and the purchase price allocation for MaintainX is not yet complete.

The financial transmission runs as follows: consolidating MaintainX adds about $60 million of revenue in the second half but also brings operating losses, intangible amortization and transaction costs that dilute operating margin; acquisition financing raises interest expense and reduces cash, which feeds into EPS and free cash flow; and cost discipline in the existing business offsets part of the dilution through operating leverage. The alternative reading is that holding 39% depends on a temporarily low post-reorganization cost base, while management is prioritizing MaintainX's growth momentum ahead of synergies in the early integration and has acknowledged that the deal's high-growth, low-margin profile affects both fiscal 2027 and fiscal 2028[37], so the dilution may last more than one fiscal year.

In the third quarter, the points to watch are whether non-GAAP EPS reaches the $3.09 top of guidance, whether the roughly 39% full-year non-GAAP operating margin is maintained, how much of MaintainX's roughly $60 million second-half revenue contribution shows up in the third quarter, and the actual amounts of interest expense and acquisition amortization. If non-GAAP EPS comes in below the $3.04 low end of guidance, acquisition dilution has exceeded plan; if MaintainX revenue is clearly below the roughly $60 million second-half expectation, the growth rationale for the deal is challenged.

Risks and Falsifiers

The first risk is that AI reshapes competition in design software. The annual report warns that machine learning and other AI technologies may alter the market in unpredictable ways and reduce customer demand[32], and standalone AutoCAD and AutoCAD LT products alone made up 25% of fiscal 2026 revenue; together with AutoCAD-centered industry collections, seat-based desktop design software is the core of revenue[20]. Autodesk still plans to charge for machine-driven API access and anticipates that AI monetization will shift from task automation embedded in subscriptions toward consumption-based workflow and system-level automation[8]. If NR3 stays at the top of its range and Design revenue growth does not fall clearly below Make and total revenue growth, AI has not yet eroded the seat-based core business.

The second risk is currency and regional concentration. EMEA and APAC together accounted for about 56% of fiscal 2026 revenue[19]; in the second quarter, EMEA revenue was $804 million, up 19% as reported and 13% in constant currency, APAC revenue was $344 million, and total reported growth exceeded constant-currency growth by about two points[3], so macro and geopolitical shifts in Europe and Asia-Pacific affect renewals and expansion. If the gap between constant-currency and reported growth narrows in the third quarter while every region grows at least 13% in constant currency, growth does not depend on a currency tailwind.

The third risk is that disruption from the sales reorganization drags on. The annual report warns that the 2026 Plan and the January 2026 Plan could cause attrition beyond planned reductions, lower morale and lost productivity during the transition[35], and Western Europe's expansion business was still recovering slowly in the second quarter[33]. EMEA was about 39% of second-quarter revenue, and full-year billings guidance implies roughly $5.03 billion to $5.11 billion of billings in the second half. If management says in the third quarter that Western Europe's expansion business has recovered and full-year billings guidance is held or raised, this risk recedes markedly.

The fourth risk is the high base of large fourth-quarter EBA renewals. Management said fiscal 2027 includes a large cohort of enterprise agreement renewals concentrated in the fourth quarter, creating a tough year-on-year comparison[37], and EBA seasonality affects billings, RPO and collections in the fourth and first quarters[10]. Changes in renewal size, duration or billing terms could make the roughly $5.03 billion to $5.11 billion of second-half billings and roughly $1.29 billion to $1.31 billion of second-half free cash flow swing materially. If management maintains full-year billings and free cash flow guidance in the third quarter and cRPO growth stays at or above 12%, fourth-quarter renewal pressure remains manageable.

The fifth risk is that integration and financing costs exceed plan. MaintainX is a high-growth, low-margin business in the early stages of integration, and Autodesk funded the purchase with a term loan, commercial paper and cash on hand[9] before issuing long-term notes, so interest expense and acquisition amortization will keep weighing on GAAP profit; third-quarter guidance includes acquisition amortization of $0.29 to $0.48 per share[30]. If third-quarter GAAP EPS is at least $1.87, the top of guidance, and the full-year non-GAAP operating margin holds near 39%, integration and financing costs remain within plan.

What to Watch Next

  • Renewal and expansion after the reorganization: second-quarter revenue was $2.046 billion (+16%) and billings $1.854 billion (+10%), with full-year billings guidance of $8.575 billion to $8.650 billion. Watch whether revenue approaches $2.140 billion, billings guidance is held or raised and 9%-10% organic billings growth is reiterated; revenue below $2.125 billion or a billings-guidance cut would show renewals and expansion missing plan.
  • NR3 and Western Europe: NR3 approximated the top of the 100%-110% range. If NR3 slips toward the middle of the range while Western Europe still lags, the recovery case weakens.
  • Multi-year terms and cRPO: cRPO was $5.245 billion (+12%), deferred revenue $4.258 billion (+11%) and unbilled deferred revenue $3.175 billion (−8%). cRPO growth below 9% or a year-over-year decline in deferred revenue would mean more than a change in terms.
  • Free cash flow: first-half free cash flow was $1.437 billion against full-year guidance of $2.725 billion to $2.750 billion; a guidance cut would point to weaker billings or collections than planned.
  • MaintainX's profit cost: second-quarter non-GAAP EPS was $3.30 with a 41% non-GAAP operating margin, against third-quarter guidance of $3.04 to $3.09 and about 39% for the year. Non-GAAP EPS below $3.04 or a cut to margin guidance would show dilution beyond plan; also track MaintainX revenue and interest expense.

Conclusion

Autodesk is a subscription-led design-software company with a gross margin of about 91%, whose growth depends on renewals, add-ons and collection upgrades from existing customers, with billings and cRPO serving as leading signals ahead of revenue. In the first half of fiscal 2027, revenue grew 17% and the second-quarter non-GAAP operating margin reached 41%, but second-quarter billings growth slowed to 10%, RPO grew only 2% and cRPO growth fell to 12%; meanwhile, Autodesk completed the roughly $3.6 billion MaintainX acquisition partly with a $1 billion term loan and commercial paper. The central unresolved relationship is whether renewals and expansion after the sales reorganization can sustain about 9%-10% organic billings growth once the transaction model, currency and the acquisition are stripped out, and whether, at that growth rate, cost discipline in the existing business can absorb the margin dilution from the deal.

Between the second-quarter report and November 17, the Drillr broker research library held no Autodesk reports, and news coverage consisted mainly of restated results and guidance, product launches, the MaintainX closing and the note issuance; no outside assessment from a verifiable publisher offered an independent judgment on the three debates above. For now, the only material for judging these debates is Autodesk's own disclosure and management commentary, including the CFO's explanation of margin guidance and the call remarks on organic billings, the Western Europe recovery and the EBA renewal base; those statements themselves need third-quarter data to be verified and should not be treated as an outside consensus.

Going forward, if third-quarter revenue approaches $2.140 billion, full-year billings and free cash flow guidance are held or raised, cRPO growth holds near 12% and NR3 stays at the top of its range, while non-GAAP EPS lands within guidance and the roughly 39% full-year margin is unchanged, that combination would materially strengthen the view that the slowdown reflects contract terms and that the existing business can absorb acquisition dilution. Conversely, if cRPO growth falls below 9%, deferred revenue turns to a year-over-year decline, billings guidance is cut or non-GAAP EPS comes in below $3.04, that view would weaken, indicating that pressure from renewal demand or the acquisition integration is greater than management has described.

Sources

[1] ADSK 10-K filed 2026-03-03 · business overview · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[2] Drillr earnings calendar (updated 2026-11-16) · ADSK 2026-11-24 call · 2026-11-16 · Drillr earnings calendar

[3] ADSK 8-K filed 2026-08-27 · Q2 FY2027 financial highlights, revenue mix and RPO · 2026-08-27 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000059/q227pressrelease.htm

[4] ADSK 8-K filed 2026-08-27 · Q3 and full-year FY2027 guidance · 2026-08-27 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000059/q227pressrelease.htm

[5] Drillr analyst_financial_estimates (updated 2026-11-13) · ADSK quarter ending 2026-10-31 · 2026-11-13 · Drillr analyst_financial_estimates · https://gateway.drillr.ai/mcp/private

[6] ADSK Q2 FY2027 earnings call 2026-08-27 · segment performance and transaction model tailwind · 2026-08-27 · earnings-call · https://investors.autodesk.com/

[7] ADSK 8-K filed 2026-05-28 · Q1 FY2027 financial highlights, revenue mix and RPO · 2026-05-28 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000041/q127pressrelease.htm

[8] ADSK Q2 FY2027 earnings call 2026-08-27 · Q&A on organic billings, sales reorganization and Flex · 2026-08-27 · earnings-call · https://investors.autodesk.com/

[9] ADSK 10-Q filed 2026-08-28 · MaintainX acquisition financing and liquidity · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[10] ADSK 10-K filed 2026-03-03 · subscription offerings, EBA and fourth-quarter seasonality · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[11] ADSK 10-K filed 2026-03-03 · glossary: EBA and Flex · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[12] ADSK 10-K filed 2026-03-03 · employees at January 31 2026 · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[13] ADSK 10-K filed 2026-03-03 · sales channels and new transaction model impact on fiscal 2027 · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[14] ADSK 10-K filed 2026-03-03 · net revenue by sales channel · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[15] ADSK 10-K filed 2026-03-03 · TD Synnex share of revenue · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[16] ADSK 10-Q filed 2026-08-28 · TD Synnex share and direct transactions · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[17] ADSK 10-Q filed 2026-08-28 · MaintainX role in lifecycle strategy · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[18] ADSK 10-K filed 2026-03-03 · net revenue by income statement presentation and product family fiscal 2026 · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[19] ADSK 10-K filed 2026-03-03 · net revenue by geographic area · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[20] ADSK 10-K filed 2026-03-03 · AutoCAD concentration risk · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[21] ADSK 10-K filed 2026-03-03 · GAAP to non-GAAP reconciliation fiscal 2024-2026 · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[22] ADSK 10-K filed 2026-03-03 · cash flow, capital expenditures and repurchases fiscal 2026 · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[23] ADSK 10-K filed 2026-03-03 · RPO, NR3 and multi-year billing transition · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[24] ADSK 8-K filed 2026-08-27 · Q2 FY2027 statements of operations and cash flows · 2026-08-27 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000059/q227pressrelease.htm

[25] ADSK 10-Q filed 2026-08-28 · overview of three months ended July 31 2026: NR3, deferred revenue and RPO · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[26] ADSK 8-K filed 2026-09-10 · $1 billion senior notes due 2029 and 2033 · 2026-09-10 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000119312526387877/d103766d8k.htm

[27] ADSK 8-K filed 2026-08-27 · billings definition · 2026-08-27 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000059/q227pressrelease.htm

[28] ADSK Q2 FY2027 earnings call 2026-08-27 · guidance commentary and MaintainX contribution · 2026-08-27 · earnings-call · https://investors.autodesk.com/

[29] ADSK 10-Q filed 2026-08-28 · Q2 FY2027 cost of revenue, operating expenses and Q3 expense outlook · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[30] ADSK 8-K filed 2026-08-27 · Q2 FY2027 non-GAAP reconciliation and Q3 EPS bridge · 2026-08-27 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000059/q227pressrelease.htm

[31] ADSK 10-K filed 2024-06-10 · audit committee investigation of free cash flow practices · 2024-06-10 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939724000090/adsk-20240131.htm

[32] ADSK 10-K filed 2026-03-03 · competition and AI disruption · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[33] ADSK Q2 FY2027 earnings call 2026-08-27 · management highlights on sales reorganization, Fusion and Forma · 2026-08-27 · earnings-call · https://investors.autodesk.com/

[34] ADSK 8-K filed 2026-05-28 · MaintainX acquisition announcement · 2026-05-28 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000121390026062125/ea029248301ex99-1.htm

[35] ADSK 10-K filed 2026-03-03 · 2026 Plan and January 2026 Plan restructuring risk · 2026-03-03 · 10-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000015/adsk-20260131.htm

[36] ADSK 10-Q filed 2026-08-28 · Q2 FY2027 net revenue by product family and product type · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[37] ADSK Q2 FY2027 earnings call 2026-08-27 · risks discussed · 2026-08-27 · earnings-call · https://investors.autodesk.com/

[38] ADSK 10-Q filed 2026-08-28 · risk factors on annual billing, Flex and acquisitions · 2026-08-28 · 10-Q · https://www.sec.gov/Archives/edgar/data/769397/000076939726000061/adsk-20260731.htm

[39] ADSK 8-K filed 2026-08-27 · CFO commentary on guidance, margin and MaintainX · 2026-08-27 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000059/q227pressrelease.htm

[40] ADSK 8-K filed 2026-05-28 · Q2 and full-year FY2027 guidance before MaintainX · 2026-05-28 · 8-K · https://www.sec.gov/Archives/edgar/data/769397/000076939726000041/q127pressrelease.htm

Related:ADSK

Want deeper analysis?

Ask drillr anything about ADSK — powered by SEC filings, earnings calls, and real-time data.

Try drillr.ai for free

drillr can make mistakes. Information only — not investment advice. Learn more